this is the header image for baniels.com

Monthly Archives: December 2012

Stereo Integrity HT-18D2 [design/build] 3 of 3

Stereo Integrity HT-18D2 [design/build] 3 of 3

Continuing from HERE. 12/19 – Attaching the dowels to the baffle I started by placing the baffle on the box – face up. Added the PL to the dowel, carefully avoiding the hole. Then lifted the baffle to put the dowel in place. I kept the baffle raised slightly until I got the bolt started,Continue Reading

Stereo Integrity HT-18D2 [design/build] 2 of 3

Stereo Integrity HT-18D2 [design/build] 2 of 3

Continuing from HERE. Final non-baffle dowel installed. The driver cutout for the baffle is complete. The next step is to work on the dowels that will tie the driver to the cabinet – I need to make a jig to drill straight 3/8″ holes in the dowels to receive the threaded¬†inserts.        Continue Reading

Stereo Integrity HT-18D2 [design/build] 1 of 3

Stereo Integrity HT-18D2 [design/build] 1 of 3

Design complete. Cabinet will be constructed from a single layer of pre-veneered plywood from Menards. I had some left over from another project. All bracing will be from 1.25″ solid wood dowels. The net internal volume is calculates to 4.24 cubic feet. That includes .2 cubes as indicated by SI for the driver’s displacement. IfContinue Reading